Lada Niva Camshaft "Trofi" Under Hydraulic Compensator Assembly 11.0 / 10.0 mm (phase 251 )

  • mpn: 21214-1006010
  • Product Code: LADA 4x4, LADA 4x4 M, Lada 4x4 Urban
  • Weight with packing: 4.5 kg
  • Availability: In Stock

To place and send an order,
please contact us.

21214-1006010 + 21214-1006033

Camshaft Lada Niva 21214 "TrofI" 11.0 / 10.0 mm (phase 251 °) is intended only for engines with thermal gap hydraulic compensators!


This camshaft belongs to the grassroots.


Key Features of 11.0/10.0mm Camshaft:


Valve lift 11.00/10.00 mm,

Phase width (degrees PCV) 251º (hydraulic lifters).

The intake valve lift at TDC is 0.8 mm.


Additional information: Comes with a camshaft housing (bed) lowered by 0.6 mm.


To install the camshaft 11.0/10.0 you need:

• split gear,

• intake system standard,

• exhaust system desirable tuning,

• calibration of the engine control unit.


* Dead spots are the extreme positions occupied by the piston during its movement. The most distant position of the piston from the axis of the crankshaft is called the top dead center (TDC), the closest position is the bottom dead center (BDC).


APPLICABILITY

LADA 4x4 M

Lada 4x4 Urban

LADA 4x4

Write a review

Note: HTML is not translated!
    Bad           Good

Viewed

Lada Niva Camshaft "Trofi" Under Hydraulic Compensator Assembly  11.0 / 10.0 mm (phase 251 )

Lada Niva Camshaft "Trofi" Under Hydraulic Compensator Assembly 11.0 / 10.0 mm (phase 251 )

21214-1006010 + 21214-1006033Camshaft Lada Niva 21214 "TrofI" 11.0 / 10.0 mm (phase 251 °) is intend..

183.75$

//-->